Environmentally Safe (E/S) water-based products do not contain any ingredients that are known to adversely effect our global and personal environment. There are no chlorofluorocarbons of any type that would deplete the earth’s ozone, nor any chlorinated solvents of any type.
- CFC-free
- Chlorine-free
- No VOC’s
- FDA and USDA Approved*
- Biodegradable
- Non-toxic
- Non-flammable**
- Colorless, odorless and non-staining
The EIS Formula is a breakthrough in mold release technology and is the most effective release known for most mold and plastic applications. More effective in most applications than other ODC-free releases, especially on molds 130F and above. Specially formulated for most injection and compression molding and some flexible and semi-urethane foams, it is non-silicone, fully paintable and non-crazing. It will not interfere with part-bonding, heat-sealing, laminating, ultra-sonic welding, painting and silk screening. Ideal for metalizing and hot stamping. It will not build up on mold surfaces or drift. Use safely on all thermoplastics, including polyethylenes, polycarbonates, styrenes, acrylics and other sensitive plastics. Maximum operating temperature: 600F.
*Federal Definitions and Standards of Identity for Food 21 CFR 121.101 (GRAS.)
**When used as directed.
Recognized by Underwriters Laboratories
Click here for MSDS Sheet.
Net Wt. 12 oz. (16 fl. oz.)
