The FasTie® Quick Ejector Tie-In System by SMARTFLOW® quickly “ties-in” the mold ejector plate to the press ejection system in an injection molding press, dramatically reducing mold change time. Ideal for presses where space is limited and the ejector system is difficult to tie in using solid knock-out bars. Three sizes are available: 1-inch, 1-3/8 inch & 2-inch models suitable for most presses and knockout configurations. System includes couplers, studs, center ejector bars and adapters, adjustable and fixed length ejector bars and air manifold.
FEATURES & BENEFITS
- Installs easily into existing tapped holes – no additional machining required
- Reduces mold setting time by quickly uncoupling – no loose parts to stow
- Remains coupled during mold cycling for increased “tie-in” reliability and reduced wear
- SpeedBar® adjustable ejector bar changes length quickly without tools*
- SpeedBar® saves molders time and cost of machining individual ejector bars to fit different molds*
* 1-inch only
Additional information
Weight | Please select an option above. |
---|---|
Size and Model | 1" Coupler |
Thread Size | ½ -13 |
SKU | FTFHS-63X |
SKU | FTAM-100 |
SKU | FTFHS-50 |
SKU | FTFHS-63 |
SKU | FTFHS-M12 |
SKU | FTFHS-M16 |
SKU | FTMHS-38 |
SKU | FTMHS-50 |
SKU | FTMHS-63 |
SKU | FTMHS-M12 |
SKU | FTMHS-M16 |
SKU | FTMHS-M20 |
SKU | FTCA-M16-63 |
SKU | FTCA-63 |
SKU | FTCA-M16 |
SKU | FTCA-M20 |
SKU | FTF1.4-63 |
SKU | FTF1.4-75 |
SKU | FTF1.4-M16 |
SKU | FTF1.4-M20 |
SKU | FTM1.4-63 |
SKU | FTM1.4-75 |
SKU | FTM1.4-M16 |
SKU | FTM1.4-M20 |
SKU | FTCA1.4-75 |
SKU | FTCA1.4-M16 |
SKU | FTCA1.4-M20 |
SKU | FTF2-63 |
SKU | FTF2-75 |
SKU | FTF2-M16 |
SKU | FTF2-M20 |
SKU | FTM2-63 |
SKU | FTM2-75 |
SKU | FTM2-M16 |
SKU | FTM2-M20 |
SKU | FTCA2-75 |
SKU | FTCA2-M16 |
SKU | FTCA2-M20 |
SKU | SBAB-50-6 |
SKU | SBAB-50-7 |
SKU | SBAB-50-8 |
SKU | SBAB-50-9 |
SKU | SBAB-50-10 |
SKU | SBAB-50-11 |
SKU | SBAB-50-12 |
SKU | SBAB-50-13 |
SKU | SBAB-50-14 |
SKU | FTBB-50-8 |
SKU | FTBB-50-10 |
SKU | FTBB-50-12 |
SKU | FTBB-50-14 |